Replacing bulb for
license-plate light
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
Switch off ignition.
Remove the screw 1.
Remove spacer 3 from num-
berplate carrier 2.
Remove socket 4 from
spacer 3.
Remove light source from
socket.
Replace defective light source.
Light source for license
plate light
W5W 12 V 5 W
To protect the glass on the
new bulb against contamina-
tion, always use a clean, dry
cloth to hold it; do not touch
with bare fingers.
Insert bulb in socket.
8
107
z