Press and hold down INFO 2
until the displayed value in
panel 4 is reset.
SETUP
Selecting the SETUP
Requirement
The Maxi-Scooter is stationary.
Requirement
The onboard computer is dis-
played.
Briefly press TRIP 1 repeatedly
until SETUP 3 is displayed.
Press and hold TRIP 1 to start
SETUP.
The dividing line 4 is hidden.
SETUP CLOCK is displayed.
Briefly press TRIP 1 in each
case to select the following
parameter in SETUP.
with anti-theft alarm system
OE
(DWA)
Activate alarm function of
anti-theft alarm system
automatically after switching off
the ignition DWA ON or leave
switched off DWA OFF.
Switch the ASC on or off ASC
ON / ASC OFF; or calibrate the
ASC ASC CAL.
Set time display CLOCK.
Set date DATE.
Exit SETUP EXIT.
Exit SETUP
Requirement
There are four ways to exit
SETUP.
4
49
z