BMW C 650 GT Rider's Manual page 102

Do not actuate the brakes with
8
the brake caliper removed.
Remove screws 2 of brake
100
calipers on left and right.
z
Push brake pads 3 apart
slightly by turning brake
caliper 4 back and forth against
brake rotor 5.
Carefully pull brake calipers
back and outward to remove
them from brake rotors.
Make sure ground is level and
firm and place Maxi-Scooter on
its center stand.
Raise Maxi-Scooter at
front, preferably using a
BMW Motorrad front wheel
stand, until the front wheel
rotates freely.
Mount front wheel stand
( 86).
Loosen the clamping bolts 1
on the right.
Remove quick-release axle 2
while supporting wheel.
Roll front wheel forward to re-
move it.
Install front wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and ASC
Please see the information on
the effect of wheel sizes on the
ABS and ASC chassis control
systems at the beginning of
this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.