Operating readiness switched
off (
39).
Remove side trim panel
(
94).
Charge 12V battery with a suit-
able charging device. Observe
the operating instructions for
the charger as you do this.
NOTICE
In the event of extended driving
breaks the 12V battery must be
recharged regularly. See the op-
erating instructions for your 12V
battery. Before start-up, the 12V
battery must be recharged.
Installing side trim panel
(
95).
Replace 12V battery
with anti-theft alarm system
OE
(DWA)
Switch off anti-theft alarm sys-
tem if necessary.
Turn off operating readiness.
Remove side trim panel
(
94).
Separate connector 1 for right
turn signal.
ATTENTION
Incorrect battery disconnec-
tion
Danger of short circuit
Follow the disconnection
sequence.
Remove bolt 2 and loosen bat-
tery negative battery cable.
Remove bolt 3 and loosen
positive battery cable.
Remove screw 4 and take out
mounting bracket 5.
Remove 12V battery from bat-
tery holder.
Push 12V battery into the bat-
tery holder.
Refit the mounting bracket 1
on the 12V battery.
Install screw 2.
ATTENTION
Incorrect battery connection
Danger of short circuit
9
97
z
Need help?
Do you have a question about the C evolution and is the answer not in the manual?
Questions and answers