Charging Procedure - BMW C evolution Rider's Manual

Charging procedure

6
Before charging
60
DANGER
Failure to adhere to the
power supply connection
safety information.
Injury or damage as a result, for
example, of electric shock or fire.
See the safety information for
the respective power supply
connection.
z
ATTENTION
Excessive load on the power
supply connection
Risk of fire, for example, as a re-
sult of overheating of the domes-
tic power outlet or excessive load
on the power supply
Check the maximum permissi-
ble load before using a domes-
tic power outlet other than your
own to charge the vehicle.
ATTENTION
Improper adjustment of the
charging current
Damage
Never adjust the charging cur-
rent on the standard charg-
ing current higher than the
maximum permitted continu-
ous charging rate of the wall
outlet.
NOTICE
The charging procedure can
be stopped at any time and
continued at a later point so
other consumers can use the
power supply or to avoid high
power consumption as a result
of simultaneous use by multiple
consumers.
NOTICE
If the charging procedure is inter-
rupted, e.g., as a result of a tem-
porary power failure, the charging
procedure will automatically re-
sume after the interruption.
NOTICE
Charging in extreme ambient
temperatures.
The charging procedure will slow
in extreme ambient temperatures
in order to protect the high-volt-
age battery.
NOTICE
The standard charging cable will
not work in temperatures of less
than ­25 °F (-32 °C). Before
the charging procedure, store
the charging cable in a location
with an ambient temperature of