BMW C evolution Rider's Manual page 88

9
WARNING
Dropping below the minimum
86
pad thickness
Reduced braking action, damage
to the brake
In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond their
minimum thickness.
Have the brake pads replaced
by a BMW Motorrad partner.
z
Checking rear brake pad
thickness
Park the E-Scooter, making
sure it is on level and firm
ground.
Conduct a visual inspection of
the brake pad thickness. Direc-
tion of view: From bottom right
looking at brake pads 1.
Rear brake-pad wear
limit
min 0.04 in (min 1.0 mm)
(Only friction material without
carrier plate.)
If the brake pads have fallen be-
low the minimum lining thickness:
ATTENTION
The parked vehicle rolls
away as a result of reduced
braking power caused by the
minimum lining thickness not
being met