Configuring G'zgear - Casio G'zOne Commando User Manual

Configuring G'zGEAR

1.
On the G'zGEAR Home menu screen, touch Settings.
2.
Change the following settings as necessary.
Calibrate compass: Allows you to calibrate the electronic
compass.
GPS: Check to automatically set the current location while using
G'zGEAR.
G Switch: Check to enable switching of tools by shaking the phone
to the left. When shaking the phone, be sure to hold the phone
firmly and make sure you do not hit the phone against nearby
objects.
Save last mode: Check to display the previously displayed mode
when starting a tool.
Pedometer: Check to count your steps with the pedometer.
Form analysis: Check to enable analysis of your running form
during Adventure Training.
Unit of temperature: Allows you to set the unit for displaying
temperature to Centigrade or Fahrenheit.
Unit of distance/length: Allows you to set the unit for displaying
distance to miles or metric.
Body Settings: Allows you to enter your height, weight, age,
sex, and length of stride which are used to measure the traveled
distance and burned calories from the number of steps counted
with the pedometer. Check Automatic calculation to automatically
calculate the length of stride.
Star Gazer Settings: See "Constellation View mode" on page 224.
Widget Settings: Allows you to configure the display refresh
interval for Virtual Trek widget and Pedometer widget.
Restore defaults: Resets all G'zGEAR settings to defaults.
227