Casio G'zOne Commando User Manual page 19

3.
Raise the microSD card cover by rotating it
in the direction of the arrow shown in the
right figure.
4.
Remove the microSD card from the microSD
card cover as shown in the right figure.
5.
Lower the microSD card cover by rotating it
in the direction of the arrow shown in the
right figure.
6.
Lightly press and hold the microSD card
cover with your finger cushion 1, then
lock it by sliding it in the direction of the
arrow 2 as shown in the right figure.
7.
Install the battery and replace the battery cover making sure to
slide the Battery Cover Lock to the LOCK position.
• For instructions on how to install the battery and the battery cover,
refer to steps 3 through 6 of "Installing and removing the battery"
on page 13.
D
17