Installing A Microsd Card - Casio G'zOne Commando User Manual

Installing a microSD card

Warning!
• Whenever installing or removing a microSD card, make sure
the phone is turned off and that the Wall/USB Charger is not
connected.
• When installing or removing a microSD card, avoid touching the
microSD card terminal to avoid damaging the microSD card,
causing malfunction or loss of data.
• The front and the back of the microSD card
look different. When inserting the memory
card, make sure that the terminals of the
phone and the microSD card are facing each
other. If not, the microSD card may not fit in
the microSD card socket, or the microSD
card and/or card cover may be damaged.
• Do not forcibly insert the microSD card into the microSD card
cover. Hold the card so that the terminals of the phone and the
microSD card are facing each other, and carefully insert it.
• To lock or unlock the microSD card cover, lightly press and hold
it with your finger cushion, and slide it in the direction of lock or
unlock. Do not use your nail or like when sliding the microSD card
cover. Otherwise personal injury or damages on the microSD
card, microSD card cover, and/or phone may result.
• Failure to completely reseal the battery cover after installing the
memory card may result in damage if the phone is exposed to
water.
1.
Remove the battery cover and the battery.
For instructions on how to remove the battery cover and the battery,
refer to steps 1 through 3 of "Installing and removing the battery"
on page 13.
18
Insert like this.