Walking Counter - Casio G'zOne Commando User Manual

Walking Counter

You can count the number of steps you traveled with the Walking
Counter tool.
NOTES
• The pedometer counts your steps while the phone power is on.
You do not need to open G'zGEAR to count your steps.
• The counter is reset everyday at midnight.
• The pedometer detects the small vibrations generated when you
are walking or jogging and counts them as steps. The error of the
count increases if your steps cannot be detected normally or if
vibration other than from walking or jogging is detected.
• The steps counted by the pedometer may differ from the actual
number of your steps. Use the counted result only as a guide.
• The length between points as displayed in Virtual Trek mode is
not accurately scaled to the actual real-world distance between
points.
Virtual Trek mode
In Virtual Trek mode, you can virtually hike along famous trails on the
seven continents. The distance you hiked on the trail is calculated
based on the number of steps counted by the pedometer.
1.
On the G'zGEAR Home menu screen, touch Walking Counter.
2.
If necessary, touch either of the switch mode icons
to Virtual Trek mode.
The Virtual Trek screen displays your distance hiked, current
position on the trail, the percentage of the trail you have hiked, and
trail milestones.
• Touch and hold the screen or touch the Menu key
the following options:
Trek selection: Allows you to select the trail to walk from the list.
Delete trek walking data: Deletes trail's walking data.
to switch
M to access
213