Bluetooth Settings Screen - Casio G'zOne Commando User Manual

Add Wi-Fi network: Opens a dialog where you can add a Wi-Fi
network by entering its SSID (network name) and security type. See
"Connecting to Wi-Fi networks" on page 99.
• Touch Menu key
manually scan for networks.
• In addition to the settings described in this section, you can touch
the Menu key M on the Wi-Fi settings screen and touch Advanced
to configure the settings described in "Advanced Wi-Fi settings
screen" on page 257.
Advanced Wi-Fi settings screen
Wi-Fi sleep policy: Opens a dialog where you can set whether and
when the Wi-Fi radio disconnects. Disabling sleep uses more battery
power.
MAC address: The Media Access Control (MAC) address of your
phone when connecting to Wi-Fi networks.
IP settings: If you check Use static IP, you can use IP settings
to enter an IP address and other network settings for your phone
manually, rather than using the DHCP protocol to obtain network
settings from the Wi-Fi network itself.

Bluetooth settings screen

For details about working with these settings, see "Connecting to
®
Bluetooth devices" on page 109.
Bluetooth: Check to turn on Bluetooth so you can connect to
Bluetooth devices.
Device name: Opens a dialog where you can give your phone a
name that is visible on some Bluetooth devices when you pair them.
The current name is displayed.
Discoverable: Check to make your phone discoverable by other
Bluetooth devices for 60 seconds.
M > Scan on the Wi-Fi settings screen to
257