1
(1) Rear brake pedal
(2) Free play: 20-30 mm
If adjustment is necessary, turn the rear
•
brake adjusting nut (3).
Make sure that the cut-out on the adjusting
•
nut is seated on the brake joint pin (4) after
the final adjustment has been made.
B
A
3
(3) Adjusting nut
CW- Clockwise, ACW- Anticlockwise
(A) Decrease free play (CW)
(B) Increase free play (ACW)
(4) Brake joint pin
2
3
4
(A) Cut-out not seated
(3) Adjusting nut
Apply the brake several times and check for
•
free wheel rotation when released.
If proper adjustment cannot be obtained by
this method, visit your Authorised
workshop.
MotoCorp
(e) Brake wear indicators
When the brake is applied, an arrow (1),
fixed to the brake arm (2), moves towards a
reference mark (3) on the brake panel (4). If
the arrow aligns with the reference mark on
4
full application of the brake, the brake shoes
must be replaced.
39
X
3
4
(B) Cut-out seated
(4) Brake joint pin
NOTE
ü
Hero