Table of Contents
Advertisement
Manufactured by:
Tide Water Oil Co. (India) Ltd.
•
Savita Oil Technologies Limited.
•
Bharat Petroleum Corporation Limited.
•
OIL CAPACITY: 1 litres
Engine oil level inspection/Top up
process
Check engine oil level each day before
operating the vehicle.
The oil level dipstick (1) is on the right
crankcase cover for measuring oil level. Oil
level must be maintained between the upper
(2) and lower (3) level marks on the oil level
dipstick.
Do top up if oil level reaches towards the lower
level mark or every 3000 km whichever is
earlier.
UPPER
LOWER
1. Oil level dipstick
3. Lower level mark
3
2. Upper level mark
Park the vehicle on its main stand.
•
Start the engine & let it idle for 3-5
•
minutes.
S
top the engine and wait for 2-3 minutes.
•
Remove the oil level dipstick, wipe it clean
•
and insert without screwing it in.
Remove the oil level dipstick and check the
•
oil level.
If required, add the specified oil up to the
•
upper level mark. Do not overfill.
Quantity of oil to be filled is 0.85 litre
•
(approx.) during oil change when right
crankcase cover is not removed.
Reinstall the oil level dipstick and check for
•
oil leaks.
Engine oil replacement process/
Oil circulation inspection
Drain engine oil with the engine warm and the
vehicle on its main stand.
To drain the oil, remove the oil level dipstick
•
and drain bolt (1) with sealing washer (2).
1
After the oil has completely drained,
•
reinstall the drain bolt with a new sealing
washer.
Fill the crankcase through the oil filler hole
•
with
0.85 litre
2
recommended grade oil.
Reinstall the oil level dipstick with a new
•
O-ring.
Start the engine and allow it to idle for few
•
minutes.
27
(approximately) of the
Advertisement
Table of Contents
