HERO HF 100 Manual page 41

The distance, the front brake lever (1) and
integrated brake pedal (2) moves before each
brake starts to engage is called free play (3).
(b) Front brake cable (A) on "F" side
Adjustment
Push the integrated brake arm (4) by hand
Ÿ
in the direction as shown.
Turn the first adjuster nut (5) till you cannot
Ÿ
turn it by hand.
4
(4) Integrated brake arm (5) First adjuster nut
(i) Decrease free play (ii) Increase free play
Check the free play of front brake lever.
Ÿ
FREE PLAY: 10-20 mm
If the free play is out specification turn the
Ÿ
adjuster nut to obtain desired free play.
(c) Integrated brake cable (B) on "C" side
Adjustment
Push the integrated brake arm (4) by hand
Ÿ
in the direction as shown.
Turn the second adjuster nut (6) until a gap
Ÿ
is created between joint (7) and the slot on
the first side in integrated brake arm.
A
5
After ensuring the gap, turn the second
•
adjuster nut counterclockwise by half
rotation.
Check the free play of rear brake pedal.
•
FREE PLAY: 20-30 mm
If the free play is out specification turn the
•
adjuster nut to obtain desired free play.
(6) Second adjuster nut (7) Joint
(i) Decrease free play
"F" & "C" is marked on integrated brake arm.
(d) Rear brake inspection
Adjustment
Park the vehicle on its main stand.
•
Measure the brake pedal (1) free play
•
before the brake starts to take hold.
Free play (2) should be 20-30 mm.
38
7
6 B
(ii) Increase free play
NOTE