Cutting And Placing Thermal Pads - ekwb EK-Quantum Vector Trinity RTX 3080/3090 Active Backplate User Manual

Thermal PAD G 1.0 mm (120 x 24 mm)
120 mm
Thermal PAD G 1.5 mm (120 x 24 mm)
120 mm
Thermal PAD G 2.0 mm (120 x 24 mm)
120 mm
3080 Version
Thermal Pad G 1.5 mm
Thermal Pad G 2.0 mm
STEP 2

CUTTING AND PLACING THERMAL PADS

Your backplate comes with thermal pads that have to be cut into
smaller pieces to cover all the VRM components. EK made sure to
1 mm provide you with more than an adequate quantity of thermal pads to
complete this Step.
1.5 mm
Replacement thermal pads:
3x Thermal PAD G 1.0 mm - (120 x 24 mm) – EAN: 33830046996770
1x Thermal PAD G 1.5 mm - (120 x 24 mm) – EAN: 3830046996787
3x Thermal PAD G 2.0 mm - (120 x 24 mm) – EAN: 3830046996794
2 mm
STEP 2
STEP 3
Once cut to size, thermal pads should be placed on the backplate,
as illustrated below.
STEP 3
- 8 -
You must remove the protective foil from both sides of the
thermal pad before installation.