oventrop Multidis SFQ Operating Instructions Manual page 25

Multidis SFQ
3. Then heat at the maximum design flow
temperature for at least 4 days.
Control the flow temperature via the heat gen-
erator control.
8.2 Correction factors for mixtures
of water and glycol
Take the correction factors of the manufactur-
ers of the antifreeze liquids into consideration
when setting the flow rate.
9. Maintenance
Regularly check the tightness and function of
the product and its connection points as part of
system maintenance.
10. Removal and disposal
NOTICE
Risk of environmental pollution
Incorrect disposal (for instance with do-
mestic waste) may lead to environmen-
tal damage.
f Dispose of packaging material in
an environmentally friendly manner.
f Dispose of the components
properly.
If no return or disposal agreement has been
made, dispose of the product yourself.
f If possible, recycle the components.
f Dispose of components which cannot be
recycled according to the local regula-
tions. Disposal with domestic waste is not
permitted.
140495281-V01.12.2020
Maintenance
25