Replacing The Presser Foot; Replacing The Presser Foot; Presser Foot Precautions - Brother Sewing Machines Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Replacing the Presser Foot

The presser foot presses down on the fabric.

Presser foot precautions

Be sure to observe the following precautions
concerning the presser feet.
CAUTION
● Use the presser foot appropriate for the
type of stitch that you wish to sew,
otherwise the needle may hit the presser
foot, causing the needle to bend or break.
● Only use presser feet designed specifically
for this sewing machine. Use of any other
presser foot may result in injuries or
damage to the machine.

Replacing the presser foot

Replace the presser foot as described below.
For details on using the side cutter "S", refer to
"Sewing overcasting stitches using the optional side
cutter" (page 73).
a Press (needle position button) once or
twice to raise the needle.
a Needle position button
The needle is raised.
b Turn off the sewing machine.
CAUTION
● Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if
button) is accidentally pressed and the
machine starts sewing.
c Raise the presser foot lever.
a Presser foot lever
The presser foot is raised.

Replacing the Presser Foot 41

(start/stop
a
1