Download  Print this page

Brother Sewing Machines Operation Manual Page 86

Computerized sewing machine.
Hide thumbs


— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Start sewing.
Set the sewing speed controller to the left (so
that the speed will be slow).
The sewing machine automatically stops
after sewing reinforcement stitches.
• If additional strength is needed to secure the
button, perform the button-sewing operation
Use scissors to cut the upper thread and the
bobbin thread at the beginning of the stitching.
Pull the upper thread at the end of the stitching
to the wrong side of the fabric, and then tie it
with the bobbin thread.
When you are finished attaching the button,
slide the drop feed lever to
as seen from the rear of the machine) to raise
the feed dogs.
a Drop feed lever (as seen from the rear of the
The feed dog position switch is normally set
to the right side (as seen from the rear of
The feed dogs come up when you start
sewing again.
(to the right
■ Attaching a shank to a button
To sew the button with a shank, attach the button
with space between it and the fabric, and then
wind the thread by hand. This attaches the button
Place the button into button-sewing foot "M",
and then pull the shank lever toward you.
a Shank lever
After sewing is finished, cut the upper thread
with plenty of excess, wind it around the
thread between the button and the fabric, and
then tie it to the upper thread at the beginning
of the stitching.
Tie together the ends of the bobbin thread at
the end and at the beginning of the stitching on
the wrong side of the fabric.
Cut off any excess thread.
Buttonhole Stitching/Button Sewing 85


Table of Contents

   Related Manuals for Brother Sewing Machines

This manual is also suitable for:

Sewing machine885-v14Ns80

Comments to this Manuals

Symbols: 0
Latest comments:
  • Teresa Fields Dec 07, 2018 03:19:
    I have unfortunat​ely moved several times in the last 5 years and cannot find the manual for my brother GX37 sewing machine. I actually have never unboxed it. Recently I needed to make something and when I sew the seams they are not catching from the bottom, I think. I finish a seam, pull it out of the machine, and the thread just comes right out. This is my first brother product, and I have to say I am not impressed. Why is this happening?
  • john merchant Nov 26, 2017 09:11:
    could you please tell me if there is a instructio​n manual for a Brother BC 2100 computer sewing machine many thanks
  • jahangir Mar 21, 2017 07:18:
    zigzag machine error message 855
    plz help me
  • Vivian Jul 22, 2015 06:22:
    Can you please send me the link to show a picture of how the bottom of the bobbin need to look something has come loose behind the bobbin casing it could be for moving the fabric it was clicking there now the fabric won't move vlewis181@​gmail is my email address