Brother Sewing Machines Operation Manual page 35

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
d Insert the extra spool pin into the end of the
bobbin winder shaft.
Install the thread spool and thread the upper
e
thread.
Memo
When setting the thread spool, set it so that
the thread winds off from the front of the
spool.
f Thread the upper thread for the right side in
the same way that the upper thread for the left
side was threaded.
1
a Thread guide cover
• For details, refer to step
"Threading the upper thread" (page 28).
34
a Bobbin winder shaft
b Extra spool pin
c Thread spool
h j
through of
g Without passing the thread through the needle
bar thread guide, manually thread the right
needle.
Pass the thread through the eye of the needle
from the front.
h
Attach zigzag foot "J".
• For details on changing the presser foot, refer
to "Replacing the presser foot" (page 41).
CAUTION
● When using the twin needle, be sure to
attach zigzag foot "J", otherwise the
needle may break or the machine may be
damaged.
i Turn on the sewing machine.
The LCD comes on.