Download  Print this page

Brother Sewing Machines Operation Manual Page 132

Computerized sewing machine.
Hide thumbs

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Symptom
A high-pitched
noise is made while
sewing.
The needle threader
cannot be used.
The stitch is not
sewn correctly.
The fabric does not
feed.
The sewing lamp
does not come on.
Nothing appears in
the LCD.
Probable Cause
Dust has accumulated in the feed
dogs or in the bobbin case.
The upper thread was not threaded
correctly.
The bobbin case is scratched, or has
a burr on it.
A bobbin designed specifically for
this machine is not used.
The needle has not been raised to the
correct position.
The needle is incorrectly installed.
The presser foot that is used is not
appropriate for the type of stitch that
you wish to sew.
The thread tension is incorrect.
The thread is tangled, for example, in
the bobbin case.
The feed dogs are lowered.
The stitch is too short.
The presser foot that is used is not
appropriate for the type of stitch that
you wish to sew.
The thread is tangled, for example, in
the bobbin case.
The sewing lamp is damaged.
The brightness of the LCD is either
too light or too dark.
Remedy
Clean the race.
Correct the upper threading.
Replace the bobbin case. Contact
your dealer or the nearest
authorized service center.
Incorrect bobbins will not work
properly. Only use a bobbin
designed specifically for this
machine.
Press the needle position button.
Correctly install the needle.
Attach the presser foot that is
appropriate for the type of stitch
that you wish to sew.
Adjust the tension of the upper
thread.
Remove the tangle thread. If the
thread is tangled in the bobbin
case, clean the race.
Slide the drop feed lever to the
right. (as seen from the rear of the
machine)
Lengthen the stitch length.
Attach the presser foot that is
appropriate for the type of stitch
that you wish to sew.
Remove the tangle thread. If the
thread is tangled in the bobbin
case, clean the race.
Contact your dealer or the nearest
authorized service center.
Adjust the brightness of the LCD.
Troubleshooting 131
Reference
page 126
page 28
page 22
page 31
page 39
page 120
4
page 57
page 126
page 97
page 59
page 120
page 126
page 134

Advertisement

Table of Contents

   Related Manuals for Brother Sewing Machines

This manual is also suitable for:

Sewing machine885-v14Ns80

Comments to this Manuals

Symbols: 0
Latest comments:
  • Teresa Fields Dec 07, 2018 03:19:
    I have unfortunat​ely moved several times in the last 5 years and cannot find the manual for my brother GX37 sewing machine. I actually have never unboxed it. Recently I needed to make something and when I sew the seams they are not catching from the bottom, I think. I finish a seam, pull it out of the machine, and the thread just comes right out. This is my first brother product, and I have to say I am not impressed. Why is this happening?
  • john merchant Nov 26, 2017 09:11:
    could you please tell me if there is a instructio​n manual for a Brother BC 2100 computer sewing machine many thanks
  • jahangir Mar 21, 2017 07:18:
    zigzag machine error message 855
    plz help me
  • Vivian Jul 22, 2015 06:22:
    Can you please send me the link to show a picture of how the bottom of the bobbin need to look something has come loose behind the bobbin casing it could be for moving the fabric it was clicking there now the fabric won't move vlewis181@​gmail is my email address