Download  Print this page

Brother Sewing Machines Operation Manual Page 75

Computerized sewing machine.
Hide thumbs

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
f
Raise the presser foot lever to check that the
side cutter is securely attached.
g
Pass the upper thread under the side cutter,
and then pull it out toward the rear of the
sewing machine.
Select a stitch.
h
• For details, refer to "Selecting stitching" (page
67).
CAUTION
● After adjusting the stitch width, slowly
turn the handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the
needle may bend or break.
Make a cut of about 2 cm (3/4 inch) long in
i
the fabric at the beginning of the stitching.
a 2 cm (3/4 inch)
74
1
j
Position the fabric in the side cutter.
The cut in the fabric should be positioned over
the guide plate of the side cutter.
a
a Guide plate
• If the fabric is not positioned correctly, the
fabric will not be cut.
k
Lower the presser foot lever, and then start
sewing.
A seam allowance is cut while the stitching
is sewn.
• If the stitching is sewn in a straight line, the
seam allowance will be about 5 mm
(3/16 inch).
1
a 5 mm (3/16 inch)
Memo
The side cutter can cut as much as one layer
of 13-oz. denim.
After using the side cutter, clean it by
removing any lint or dust.
If the side cutter can no longer cut fabric,
use a rag to apply a small amount of oil to
the cutting edge of the cutter.
The optional side cutter is available through
your Brother dealer.

Advertisement

Table of Contents

   Related Manuals for Brother Sewing Machines

This manual is also suitable for:

Sewing machine885-v14Ns80

Comments to this Manuals

Symbols: 0
Latest comments:
  • Teresa Fields Dec 07, 2018 03:19:
    I have unfortunat​ely moved several times in the last 5 years and cannot find the manual for my brother GX37 sewing machine. I actually have never unboxed it. Recently I needed to make something and when I sew the seams they are not catching from the bottom, I think. I finish a seam, pull it out of the machine, and the thread just comes right out. This is my first brother product, and I have to say I am not impressed. Why is this happening?
  • john merchant Nov 26, 2017 09:11:
    could you please tell me if there is a instructio​n manual for a Brother BC 2100 computer sewing machine many thanks
  • jahangir Mar 21, 2017 07:18:
    zigzag machine error message 855
    plz help me
  • Vivian Jul 22, 2015 06:22:
    Can you please send me the link to show a picture of how the bottom of the bobbin need to look something has come loose behind the bobbin casing it could be for moving the fabric it was clicking there now the fabric won't move vlewis181@​gmail is my email address