Download  Print this page

Pulling Up The Bobbin Thread - Brother Sewing Machines Operation Manual

Computerized sewing machine.
Hide thumbs


— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Pulling up the bobbin thread

When making gathers or before free-motion quilting,
first pull up the bobbin thread as described below.
Insert the bobbin into the bobbin case.
• Refer to steps
bobbin" (page 26).
Pass the bobbin thread through the slot.
Do not cut the thread with the cutter.
While lightly holding the upper thread with
your left hand with the needle in the up-
position, press
(needle position button)
twice to lower and raise the needle.
a Needle position button
The bobbin thread is looped around the
upper thread and can be pulled up.
Carefully pull the upper thread upward to pull
out the end of the bobbin thread.
of "Installing the
Pull out about 10-15 cm (4-5 inches) of the
bobbin thread under the presser foot toward
the rear of the machine.
Reattach the bobbin cover.
Insert the tab in the lower-left corner of the
bobbin cover (A), and then lightly press down
on the right side (B).


Table of Contents

   Related Manuals for Brother Sewing Machines

This manual is also suitable for:

Sewing machine885-v14Ns80

Comments to this Manuals

Symbols: 0
Latest comments:
  • Teresa Fields Dec 07, 2018 03:19:
    I have unfortunat​ely moved several times in the last 5 years and cannot find the manual for my brother GX37 sewing machine. I actually have never unboxed it. Recently I needed to make something and when I sew the seams they are not catching from the bottom, I think. I finish a seam, pull it out of the machine, and the thread just comes right out. This is my first brother product, and I have to say I am not impressed. Why is this happening?
  • john merchant Nov 26, 2017 09:11:
    could you please tell me if there is a instructio​n manual for a Brother BC 2100 computer sewing machine many thanks
  • jahangir Mar 21, 2017 07:18:
    zigzag machine error message 855
    plz help me
  • Vivian Jul 22, 2015 06:22:
    Can you please send me the link to show a picture of how the bottom of the bobbin need to look something has come loose behind the bobbin casing it could be for moving the fabric it was clicking there now the fabric won't move vlewis181@​gmail is my email address