Moving A Point - Brother QC 1000 Operation Manual

ENTERING STITCH DATA
h
Press
Memo
• If you have entered points that are too close
together, the fabric may not feed properly. Edit the
stitch data to leave a larger space between points.
• If the stitch design is to be repeated and linked,
make sure that linking stitches are added so that the
stitch designs will not overlap.
a Linking stitches
i
If necessary, adjust any settings, such as the
stitch width and stitch length.
* Press
* Press
130
.
a
to return to the stitch selection screen.
to edit the custom stitch being created.

■ Moving a Point

a
Press or
that you want to move.
* To move to the first point, press
* To move to the last point, press
* You can also move
b
Use to move the point.
to move to the point
.
.
by using the touch pen.