Adjusting Patterns - Brother QC 1000 Operation Manual

SEWING STITCH PATTERNS
e
Press the "Start/Stop" button to stop the
machine, and then press the "Reverse/
Reinforcement Stitch" button to sew
reinforcement stitches.
Memo
• When sewing character stitch patterns, the machine
automatically sews reinforcement stitches at the end
of the stitching, then stops (The machine is
automatically set to sew reinforcement stitches at
the beginning and end of each character.)
• After sewing is finished, trim any excess thread.
Note
When sewing some patterns, the needle will stop in
the raised position while the fabric is fed due to the
operation of the needle bar separation mechanism
which is used in this machine. At such times, a clicking
sound different from the sound generated during
sewing will be heard. This sound is normal and is not
the sign of a malfunction.
106

Adjusting Patterns

Depending on the type and thickness of the fabric being
sewn, the sewing speed, whether or not stabilizer
material is used, etc., the desired result may not be
achieved. If this occurs, press
the following adjustment using the same sewing
conditions as those used for your project. If the pattern
is still misaligned after making adjustments with
selected, adjust each pattern separately.
a
Press , and then press
the screen.
b
Attach presser foot "N", and then sew the
pattern.
c
Compare the sewn pattern with the following
illustration.
, and then perform
on P. 6 of