Brother QC 1000 Operation Manual page 100

h
Close the zipper, turn the fabric over so that
the surface faces up, and then baste the other
side of the zipper to the fabric.
a
a Front of garment (wrong side of fabric)
b Back of garment (surface of fabric)
c Basting
d Front of garment (surface of fabric)
i
Remove the presser foot, and then attach the
pin on the left side of the zipper foot to the
presser foot holder.
a
b
a Right side
b Left side
c Needle drop point
j
Set the fabric so that the left edge of the
presser foot touches the edge of the zipper
teeth.
k
Sew reverse stitches at the closed end of the
zipper, then continue sewing.
l
Stop sewing about 50 mm (approx.
2 inches) from the edge of the fabric, leave
the needle in the fabric, and remove the
basting stitches.
m
Open the zipper and sew the rest of the seam.
a
b
c
d
a Basting
b Reverse stitching
c 7 to 10 mm (approx. 1/4 to 3/8 inch)
d 50 mm (approx. 2 inches)
c
b
d
c
SEWING THE STITCHES
3
99