Casio MZ-2000 Midi Implementation Manual page 20

MZ-2000 MIDI Implementation
4.4.3.2 System Chorus
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ParaID Parameter
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0007 ChoMacro
Chorus Macro
Batch sets system chorus parameters to preset values.
0008 ChoPreLpf
Chorus Pre-low Pass Filter
Sets the cut off frequency value of the low pass filter (-6dB/oct), which filters the
high frequency components of the sound input into system chorus.
0009 ChoLevel
Chorus Level
Sets the return (output) level of the chorus.
0010 ChoFeedback
Chorus Feedback
Sets the feedback level of the chorus sound.
0011 ChoDelay
Chorus Delay
Sets the delay time of the chorus sound.
The delay time is calculated using the following formula.
(ChoDelay / 7FH) * 23.8[msec]
Bit Default Value
8 00H - 13H 02H
value macro
- - - - - + - - - - - - -
00H Cho1
01H Cho2
02H Cho3
03H Cho4
04H FbCho
05H Flng1
06H SDly
07H FbSDl
08H Cho5
09H Cho6
0AH Cho7
0BH Ens1
0CH Ens2
0DH Ens3
0EH Flng2
0FH Flng3
10H Flng4
11H Org1
12H Org2
13H Org3
8 00H - 07H 00H
value cutoff freq.
- - - - - + - - - - - - -
00H bypass
01H 20000 (Hz)
02H 8500 (Hz)
03H 5500 (Hz)
04H 3500 (Hz)
05H 2500 (Hz)
06H 1500 (Hz)
07H 500 (Hz)
8 00H - 7FH 40H
value level
- - - - - + - - - - - - -
00H 0 (%)
40H 100 (%)
7FH 200 (%)
8 00H - 7FH 08H
value level
- - - - - + - - - - - - -
00H 0 (%)
7FH 96.9 (%)
8 00H - 7FH 50H
0012 ChoRate
Chorus Rate
Sets the LFO frequency of the chorus sound.
The frequency is calculated using the following formula.
(ChoRate * 15.5 / 7FH) [Hz]
0013 ChoDepth
Chorus Depth
Sets the LFO modulation depth of the chorus tone.
(ChoDepth + 1) / 3200 [sec]
0014 ChoSendLevelToRev
Chorus Send Level To Reverb
Sets the mix level of the system chorus output sound to system reverb input.
4.4.3.3 Master
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ParaID Parameter
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0016 MasterTune
Master Tune
Sets overall tuning. The center value is 0400H.
0017 Master Key Shift
Master Key Shift
Sets the overall key shift (transpose) level. The center value is 40H.
0018 MasterVolume
Master Volume
Sets the overall volume level.
0019 MasterPan
Master Pan
Sets the overall pan position. The center value is 40H.
0020 ModeSet
Mode Set
Performs a GS reset.
4.4.4 Patch Part Parameter
4.4.4.1 Receive Filter Parameter
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
ParaID Parameter
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0024 Rx.Chan
Receive Channel
Sets the receive channel or channel message receive = OFF.
00H - 0fH : Receive Channel
10H : channel messageReceiveOFF
AllBit: bit 0 - 4 : Receive Channel, OFF=0
19
8 00H - 7FH 03H
8 00H - 7FH 13H
8 00H - 7FH 00H
value level
- - - - - + - - - - - - -
00H 0 (%)
7FH 100 (%)
Bit Default Value
16 0018H - 07E8H 0400H
0018H: -100.0 [cent]
0400H: 0.0 [cent]
07E8H: +100.0 [cent]
8 28H - 58H 40H
28H: -24 [semitones]
40H: 0 [semitones]
58H: +24 [semitones]
8 00H - 7FH 7FH
8 01H - 7FH 40H
01H: -63 (left)
40H: 0 (center)
7fH: +64 (right)
8 00H - 00H 00H
00H Rx.only (00=GsReset)
Bit Default Value
5 00H - 10H Note