Casio MZ-2000 Midi Implementation Manual page 29

MZ-2000 MIDI Implementation
hen r = 1 only (d2[0] to d2[2])
d2[0] 0ooooooo
d2[1] 0ppppppp oooooooppppppp = top index number of array to send
d2[2] 0qqqqqqq qqqqqqq = number of array member to send
(Send members in current packet)
One data size (number of bits) minus 1
d3[0] 000zzzzz
zzzzz = number of bits - 1
When zzzz + 1 is: The number of data bytes is:
1 to 7 1
8 to 14 2
15 to 21 3
22 to 28 4
29 to 34 5
Parameter Bits
7 bits
d4[0] 0xxxxxxx xxxxxxx = Data
8 to 14 bits
d4[0] 0xxxxxxx XXXXXXXxxxxxxx = Data
d4[1] 0XXXXXXX
15 to 21 bits
d4[0] 0xxxxxxx yyyyyyyXXXXXXXxxxxxxx = Data
d4[1] 0XXXXXXX
d4[2] 0yyyyyyy
4.7.3 Parameter IDs and Value Ranges
4.7.3.1 Drawbar TG Common Parameter
ParaID Bit Parameter min
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
0 8 Volume 00H
Volume balance between tones (0 -- 128 -- 255)
4.7.3.2 Setting Parameters
ParaID Bit Parameter min
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8 8 Feet 00H
Note: r = array flag = 1
Array Size = 9
Insert required data into the d2[] field.
This parameter does not reflect foot changes in real time.
Use the MIDI Control Change (NRPN) message when you want to
change the foot balance while playing.
The user drawbar parameter area is mainly used for editing.
9 7 Attack Time 00H
default: 64 Sustained tone
This is the exclusive drawbar tone sustained tone Attack Time
Modify.
The initial value depends on the preset tone.
As with Tone Modify, the value is offset by 64.
10 1 SusOn 00H
Sustained Tone Release Time Modify
default:0:(off), 1:(on) Sustain On/Off
Specifies whether Sustain Time should be reflected.
(Send start array number)
max def
FFH 80H
0.0 -- 1.0 -- 1.99
max def
7FH - -
7FH 40H
01H 00H
11 7 SustainTime 00H
This is the exclusive drawbar tone steady tone Release Time Modify.
This setting is used exclusively for modifying the attack time of the
drawbar tone steady tone.
The initial value depends on the preset tone.
As with Tone Modify, the value is offset by 64.
14 1 Click 00H
15 1 OffClick 00H
16 2 Percussion 00H
Off: 0, Second: 1, Third: 2, 2nd&3rd: 3
Note: The structure of HAMMOND B-3 makes it impossible to se-
lect 2nd&3rd.
17 2 SlowFast 00H
Percussive Decay Time
0 (off): Default
1 (Slow): Slow Time
2 (Fast): Fast Time
18 7 PercOnNormalLevel
00H
Sustained Tone Level for PercussiveOn
19 1 Soft 00H
Default: 0:(off), 1(on)
20 4 PercSoftLevel
00H
Percussive Level for SoftOn, 6 initial default value
21 4 PercDefaultLevel
00H
Percussive Level for SoftOff, 10 initial default value
22 7 FastTime 00H
Percussion Decay Time Modify Value
The initial value depends on the preset tone.
Decay Time Modify (Value:0 to 127)
As with Tone Modify, the value is offset by 64.
Operation is the same as Tone Decay Time Modify.
24 7 SlowTime 00H
Percussion Decay Time Modify Value
The initial value depends on the preset tone.
Decay Time Modify (Value:0 to 127)
As with Tone Modify, the value is offset by 64.
Operation is the same as Tone Decay Time Modify.
32 16 WaveNumber
0000H
0 = Sin Wave
1 = Vintage
Selects the original waveform for waveform combination.
Vintage is a waveform that includes
Vintage is a waveform that includes high harmonics.
28
7FH 40H;
01H 01H Default: 1(on), 0(off)
01H 01H Default:1(on), 0(off)
03H 00H
02H 00H
7FH 40H
01H 00H
0FH 06H
0FH 0AH
7FH 40H
7FH 40H
0001H - - - -