Casio MZ-2000 Midi Implementation Manual page 25

MZ-2000 MIDI Implementation
0128 RevSend
Reverb Send
Send level to system reverb
0129 VeloSenseDepth
Velocity Sense Depth
Extent to which the velocity effect changes a note. The larger the value, the greater
the change.
0130 VeloSenseOffset
Velocity Sense Offset
This indicates with how much force the note should be played
Specifies the note force offset for the velocity value.
The greater the value, the more forcibly a note is played for the same velocity value.
The center value is 40H.
0131 CC1Number
Continuous Controller 1 Number
Specifies the Continuous Controller 1 number.
0132 CC2Number
Continuous Controller 2 Number
Specifies the Continuous Controller 2 number.
0133 VibratoRate
Vibrato Rate
Specifies the vibrato rate. (=NRPN:8) The greater the value, the faster the rate. The
center value is 40H.
0134 VibratoDepth
Vibrato Depth
Specifies the vibrato depth. (=NRPN:9) The greater the value, the deeper the depth.
The center value is 40H.
0135 TvfCutoffFreq
TVF Cutoff Frequency
Specifies the TVF cutoff frequency. (=NRPN:32) The greater the value, the brighter
the tone. The center value is 40H.
0136 TvfResonance
TVF Resonance
Specifies the TVF Resonance. (=NRPN:33) The greater the value, the more distinc-
tive the tone. The center value is 40H.
0137 TvfTvaEnvAttack
TVF-TVA Envelope Attack
Specifies the TVF and TVA envelope attack rate. (=NRPN:99) The greater the value,
the sharper faster the attack and the sharper the tone. The center value is 40H.
0138 TvfTvaEnvDecay
TVF/TVA Envelope Decay
Specifies the TVF and TVA envelope decay rate. (=NRPN:100) The greater the
value, the faster the decay of the tone while keyboard keys are depressed. The center
value is 40H.
8 00H - 7FH 28H
8 00H - 7FH 40H
8 00H - 7FH 40H
8 00H - 5FH 10H
8 00H - 5FH 11H
8 00H - 7FH 40H
00H : -64
40H : 0
7FH : +63
8 00H - 7FH 40H
00H : -64
40H : 0
7FH : +63
8 00H - 7FH 40H
00H : -64
40H : 0
7FH : +63
8 00H - 7FH 40H
00H : -64
40H : 0
7FH : +63
8 00H - 7FH 40H
00H : -64
40H : 0
7FH : +63
8 00H - 7FH 40H
00H :-64
40H : 0
7FH :+63
0139 TvfTvaEnvRelease
TVF/TVA Envelop Release
Specifies the TVF and TVA envelope release rate. (=NRPN:102) The greater the
value, the faster the decay of the tone when keyboard keys are released. The center
value is 40H.
0140 VibrateDelay
Vibrato Delay
Specifies the vibrato delay length. (=NRPN:10) The greater the value, the longer the
delay length. The center value is 40H.
0141 BankNumberMSB
Bank Number
Tone bank number.
0142 ProgNum
Program Number
Tone program number.
0143 ToneMapNum
Tone Map Number
Tone map number.
00h:[88](=CC 0:Selected, 1:PresetMap)
0144 ToneMap0Num
Tone Map 0 Number
01H: PresetMap
0145 MonoPoly
Mono/Poly Mode
Single notes only can be played in the Mono mode.
Chords and other multiple notes can be played in the Poly mode.
0146 AssignMode
Assign Mode
Specifies the operation when note on for the same note is received.
When Single is specified, the currently sounding note is turned off.
When Multi is specified, the currently sounding note continues to sound along with
the new note.
0147 UseDrumPart
Use Drum Part
0148 EqLowFreq
EQ Low Frequency
Cutoff frequency of the low shelving equilizer.
0149 EqLowGain
EQ Low Gain
Gain of the low shelving equalizer
24
8 00H - 7FH 40H
00H : -64
40H : 0
7FH : +63
8 00H - 7FH 40H
00H : -64
40H : 0
7FH : +63
8 00H - 7FH 00H
8 00H - 7FH 00H
8 00H - 01H 00H
8 01H - 01H 01H
1 0H - 1H 1H
0H : Mono Mode
1H : Poly Mode
2 0H - 1H 1H
0H : Single
1H : Multi
3 0H - 4H 0H
0H : OFF(Normal Part)
1H : Map1(Drum Part)
2H : Map2(Drum Part)
3H : Map3(Drum Part)
4H : Map4(Drum Part)
2 0H - 3H 0H
0H : 200 (Hz)
1H : 400 (Hz)
2H : 800 (Hz)
3H : 1600 (Hz)
4 00H - 0CH 06H
0H : -6 (dB)
6H : 0 (dB)
cH : +6 (dB)