STEP:9
1) connect cables comes out from console (#43) & cables from the upright
tube together.
Note! check & plug cables, same color to be plug together.
Black color can plug in with any black , no need to select
special plug.
Make sure all plug firmly in then insert all plugged cables
to top of upright tube.
2) set console to the top plate on the upright tube and secure both with
screws (E)
STEP:10
As photo shown
1)First pre‐assy the dring holder base (#89) with bottle holder (#90)
together with 4 screws (#92)
2) set the holder assy to the upright tube with screw (#30) firmly
STEP:11
As photo shown
1) Plug the power cord with power adaptor (#91) into an appropriate outlet
IMPORTANT: The elliptical exerciser is not compatible with
GFCI‐equipped outlets.
2) The other end of the access hole in the rear of the base frame
Note! before plug in, please check the voltage specifications on the label.
CONSOLE ASSEMBLY
DRINK HOLDER & STORAGE RACK ASSY
POWER ADAPTOR
NO
part list
QUANTITY
E
4
NO
part list
QUANTITY
#30
2
#92
4
NO
part list
QUANTITY
#91
1