Casio fx-9750GII User Manual page 284

2. Press (STRP).
• This will display a dialog box with a list if insertable
strips. For information about the display names and
data types that appear on this dialog box, see the "Strip
Data Type Table" (page 10-8).
3. Use and to select the strip that corresponds to the type of data you want to insert.
• In this example we will select "Graph" (GRAPH mode graph screen data).
4. Press .
• This will insert the type of strip you selected (Graph strip in this example) one line above
the line where you located the cursor in step 1 of this procedure.
5. Input up to 16 characters for the strip title, and then press
.
6. Press again to start creating strip data.
• This will start up the built in application for the selected
strip type (GRAPH mode in this example), and display
the graph screen. At this point, a blank graph screen
appears because there is no data yet.
7. Press to display the graph function list screen.
8. Enter the function you want to graph.
1
(Example: Y = X
2
9. Press (DRAW).
• This will graph the function you entered.
10. To return to the eActivity workspace screen, press
• The data that is graphed in step 8 will be saved in the Graph strip.
• The saved graph data is linked to this Graph strip only. It is independent of data for
modes that are entered from the Main Menu.
11. Pressing here again will display the graph screen, and draw the graph based on the
data saved by the strip.
2 – 1)
(
10-9
).