Casio fx-9750GII User Manual page 115

3. Press (Yes) to delete the function or
anything.
• Using the above procedure to delete one line of a parametric function (such as Xt2) also
will delete the applicable paired line (Yt2, in the case of Xt2).
Selecting Functions for Graphing
To specify the draw/non-draw status of a graph
1. On the Graph relation list, use
2. Press (SEL).
• Each press of
3. Press (DRAW).
Example To select the following functions for drawing:
Y1 = 2
Use the following V-Window settings.
Xmin = –5,
Ymin = –5,
T min = 0,
(Select a memory area that contains a
function for which you want to specify non-draw.)
(SEL) (Specifies non-draw.)
(DRAW) or (Draws the graphs.)
• You can use the Setup screen settings to alter the appearance of the graph screen as shown
below.
• Grid: On (Axes: On Label: Off)
This setting causes dots to appear at the grid intersects
on the display.
• Axes: Off (Label: Off Grid: Off)
This setting clears the axis lines from the display.
• Label: On (Axes: On Grid: Off)
This setting displays labels for the
and
(SEL) toggles graphing on and off.
x 2 r
– 5, 2 = 5 sin3
Xmax = 5,
Ymax = 5,
T max = ,
x
- and
(No) to abort the procedure without deleting
to highlight the relation you do not want to graph.
Xscale = 1
Yscale = 1
T ptch = 2 / 60
y
-axes.
5-9