Chapter 14 Using Sd Cards (Fx-9860G Ⅱ Sd Only); Using An Sd Card - Casio fx-9750GII User Manual

Chapter 14
You can use SD cards to store calculator data. You can copy main memory and
storage memory data to and from an SD card.
Important!
• Always use an SD memory card. Operation is not guaranteed when another type of memory
card is used.
• Be sure to read the user documentation that comes with an SD card before using it.
• Certain types of SD cards can slow down processing speeds.
• Certain types of SD cards and operating conditions can shorten battery life.
• SD cards have a write protect switch, which protects against accidental erasure of data. Note,
however, that you need to remove write protection before you can copy data to or delete data
from, or format a disk that is write-protected.
• Static electric charge, electric noise, and other phenomena can delete or corrupt card data
unexpectedly. Because of this you should always backup valuable data to other media (CD-R,
CD-RW, MO disk, hard disk, etc.)
• SD Logo is a trademark.

1. Using an SD Card

Important!
• Always turn off the calculator before inserting or removing an SD card.
• Note that a card needs to be oriented correctly (proper side must be facing upwards, the
proper end must be inserted) when inserting it into the calculator. Trying to force card into the
slot while it is oriented incorrectly can damage the card and slot.
Removing the Dummy Card
• Your calculator is shipped from the factory with a dummy card inserted in the SD card slot.
Before using an SD card, first use the procedure under "To remove the SD card" on page
14-2 to remove the dummy card.
Using SD Cards
(fx-9860G SD only)
14-1
TM TM
14