Table of Contents
Advertisement
2.1 Operator Training
Operator using the roller system:
must read and understand this manual.
●
must have training on proper use of the roller system.
●
●
must have a training on mortuary-service procedures.
must have the physical ability to perform required functions
●
related to the use of the roller system (e.g., loading and unloading
a casket or mortuary cot into and out of the roller system).
must practice with the roller system before using it with a casket
●
or mortuary cot.
must keep training records. For a sample training record sheet, see
●
"Training Record" on page 14.
3.1 Description
The Ferno
Model 156 Roller system (called the roller system in this
®
manual) is a mortuary device designed to ease the loading, unloading,
and transporting of caskets and mortuary cots in a ground-based
vehicle. It is for professional use by trained mortuary-service operators.
Bier pins (not supplied, available separately) and restraints help limit the
movement of a casket or mortuary cot in the vehicle during transport.
The roller system secures to mounting plates installed on the floor of
the vehicle. The roller system can be easily removed so the vehicle can
be used for other purposes.
Features include 10 rollers (8 short and 2 long), two quick-release knobs,
two cot restraints, and a variety of bier-pin attachment points to allow
the use of caskets of different lengths.
COMPATIBILITY
Ferno® Model 23 Cot Series
●
Ferno® Model 24 Cot Series*
●
Ferno® Model 27 Cot Series
●
Notee:
The roller system is not compatible with Ferno® 24-MAXX or
24-MiniMAXX series cots.
3.2 General Specifications
Specifications for the roller system are shown in the tables at right.
General specifications are rounded. Metric conversions are calculated
before rounding the Imperial measurement.
Ferno reserves the right to change specifications without notice. For
more information, contact Ferno Customer Relations or your Ferno
distributor (page 2).
© Ferno-Washington, Inc. / 234-1845-01 / June 2019
Operator Focus, About the Roller System
2 - OPERATOR FOCUS
3 - ABOUT THE ROLLER SYSTEM
WARNING
Untrained operators can cause injury or be injured. Permit
only trained personnel to operate the roller system.
WARNING
Improper use of the roller system can cause injury. Use the
roller system only for the purpose described in this manual.
Load Capacity
1000 lb
Inspect the roller system if the load capacity
454 kg
has been exceeded. See "Inspecting the
71.4 st
Roller System" on page 13.
Specifications
Load Capacity
Load Capacity (UK)
Weight
Construction
Length
Width
Height
Imperial
Metric
1000 lb
454 kg
71.4 st
41 lb
18.6 kg
Aluminum with Steel Hardware
89 in
226 cm
24 in
61 cm
2 in
5 cm
5
Advertisement
Table of Contents
