Related Manuals for Ferno 156
Summary of Contents for Ferno 156
- Page 1 Model 156 Roller System Read this Manual and Retain for Future Reference Users’ Manual June 2019 Pub. No. 234-1845-01...
-
Page 2: Ferno Customer Relations
Limited Warranty Statement 1.937.382.1451 The products sold by Ferno are covered by a limited warranty, which is printed on all Ferno invoices. The complete terms and conditions of the limited warranty, and the limitations of liability and disclaimers, are also available upon request by calling Ferno at 1.800.733.3766 or... -
Page 3: Table Of Contents
4 - Installation ____________________________________________ 7 U.S.A. and Canada _________________________________ 13 Before Installing the Mounting Plates __________________ 7 Worldwide _______________________________________ 13 Installing the Mounting Plates ________________________ 8 Accessories ______________________________________ 13 Training Record__________________________________________ 14 Maintenance Record _____________________________________ 15 © Ferno-Washington, Inc. / 234-1845-01 / June 2019... -
Page 4: Safety Information
Organization (ISO), American National Standards Institute (ANSI) and the mortuary services industry. Improper parts and service can cause injury. Use only Ferno parts and Ferno-approved service on the roller system. Modifying the roller system can cause injury and damage. -
Page 5: Operator Focus
3 - ABOUT THE ROLLER SYSTEM 3.1 Description WARNING The Ferno Model 156 Roller system (called the roller system in this ® Improper use of the roller system can cause injury. Use the manual) is a mortuary device designed to ease the loading, unloading, roller system only for the purpose described in this manual. -
Page 6: Components
Short Roller (8) Restraint with Buckle (2) Post Cup (2) Long Roller (2) Roller System Mounting Plate (2) Stationary Lock Knob Assembly (2) Lock Pin (2) Bracket Adjustable Bier Pin (Not Supplied) © Ferno-Washington, Inc. / 234-1845-01 / June 2019... -
Page 7: Installation
Modifying the roller system can cause injury and damage. elements under the vehicle floor, and about the vehicle warranty. Use the roller system only as designed by Ferno. ● Determine the location to install the roller system in the vehicle. -
Page 8: Installing The Mounting Plates
○ Check the vehicle rear door for a lip or other obstruction that could interfere with loading. If interference is found, contact Ferno for assistance. See “Ferno Customer Relations” on page 2. Confirm the rear doors close securely when the roller system(s) ○... - Page 9 ● the mounting plate to the floor of your vehicle. Ferno recommends you drill a pilot hole through the vehicle floor at each mounting point (Figure 5) to confirm the mounting holes are at the expected locations. Then, use an appropriate-size drill bit, fasteners and/or other tools to install the mounting plates to the floor (Figure 6).
-
Page 10: Using The Roller System
To unload the cot, loosen the restraint by pulling the buckle up. Buckle Unhook the restraint from the cot frame. Unload the cot from the vehicle, following the instructions in the cot users’ manual. © Ferno-Washington, Inc. / 234-1845-01 / June 2019... -
Page 11: Using A Casket With The Roller System
Push the lock knob down to insert the lock pin through the slot. Turn the lock knob left or right ¼ turn to secure the lock pin in the mounting plate. Repeat with the second lock knob. Lock Pin © Ferno-Washington, Inc. / 234-1845-01 / June 2019... -
Page 12: Maintenance
○ 6.3 Disinfecting the Roller System Wipe all surfaces with disinfectant. Follow the disinfectant manufacturer’s instructions for application method and contact time. Ferno recommends Strap you inspect the roller system for damage as you disinfect it. 6.4 Cleaning the Roller System Remove the restraints. -
Page 13: Inspecting The Roller System
Your distributor is the only agent authorized by Ferno to manage, service, and repair Ferno products. 7.3 Accessories Ferno offers a full line of accessories approved for use with the roller system. Follow all instructions in accessory users’ manuals. Keep the instructions with this manual. -
Page 14: Training Record
Training Record TRAINING RECORD Training Method Trainer Date Printed Name Signature Read Video/ Initials Hands-On Manual Online © Ferno-Washington, Inc. / 234-1845-01 / June 2019... -
Page 15: Maintenance Record
Maintenance Record MAINTENANCE RECORD Date Maintenance Performed © Ferno-Washington, Inc. / 234-1845-01 / June 2019... - Page 16 Aviation 70 Weil Way Wilmington, OH 45177 Military Mortuary Rescue © Ferno-Washington, Inc. | 234-1845-01 | June 2019...