Operator Focus; Operator Training; Terms - Ferno iNSLINE Fastening System User Manual

2.1 Operator Training

Operator using the fastening system:
● must read and understand this manual.
● must have training on proper use of the fastening system.
● must have a training on emergency-medical service and
emergency patient-handling procedures.
must have the physical ability to assist the patient.
●
must practice with the fastening system before using it with
●
a patient.
● must keep training records. For a sample training record sheet,
see "Training Record" on page 18.

2.2 Terms

The following terms are used in this manual.
Fastening System: The fastening system is a generic term for
●
a device that secures a compatible ambulance cot inside an
ambulance for ground-based transport.
Integrated Charging System: ICS is a system of cables
●
and connections from the battery charger to the fastening
system. The ICS delivers charging power to the iN∫X when
powered and with an iN∫X secured in the fastening system.
Nose: The nose is the end of the fastening system nearest the
●
rear ambulance doors (or furthest from the ambulance driver.)
© Ferno / 234-3621-02 / October 2022
iN∫LINE®

2 - OPERATOR FOCUS

WARNING
Untrained helpers can cause injury or be injured. Trained
operators must operate the fastening system.
7