Table of Contents
Advertisement
4.1 Before Installing the Mounting Plates
The roller system attaches to mounting plates installed on the
●
vehicle floor.
●
Installing the mounting plates requires the skills of a mechanic
familiar with vehicle construction.
Before installing the roller system, consult the vehicle manufacturer
●
regarding the location of wiring, oxygen or fuel lines, and other
elements under the vehicle floor, and about the vehicle warranty.
●
Determine the location to install the roller system in the vehicle.
Install the roller system in the center of the vehicle, or, if the vehicle
interior is wide enough, two roller systems (sold separately) may be
installed side-by-side (Figure 1 or Figure 2).
Contact the Manufacturer
Contact the vehicle manufacturer for advice
on avoiding obstructions such as the fuel
tank, oxygen lines, etc.
Also seek advice on installing support
structure if needed, including backing plate
positioning, material, and thickness.
© Ferno-Washington, Inc. / 234-1845-01 / June 2019
Installation
4 - INSTALLATION
Failure to use the mounting plates (provided) can cause
injury. Install and use the mounting plates and roller
system as described in this manual.
Improper installation can cause injury. Install the mounting
plates and roller system as described in this manual.
Modifying the roller system can cause injury and damage.
Use the roller system only as designed by Ferno.
Attaching improper items to the roller system can cause
injury. Use only Ferno-approved items on the roller system.
Inspect the underside of the vehicle for anything (wiring,
brake lines, fuel tank, oxygen lines or other elements) that
might interfere with the installation.
Loose items and debris on the vehicle floor can interfere with
the operation of the roller system. Keep the floor clear.
WARNING
NOTICE
1
2
7
Advertisement
Table of Contents
