Completing Installation - Casablanca Four Seasons III Owner's Manual

OUTSIDE USA - SECONDARY SUPPORT
Step 16. Attach the fan cable to outlet box cable with the
spring lock hook. Make sure the spring lock is tightly closed.
Step 17. Tuck the wires into the canopy with the wire nuts
pointed upward, so that the white and black wires are on
opposite sides of the canopy and all wires are clear of the
canopy opening. Tuck the extra cable and screw lock hook
into the canopy.
NOTE: International fans and light fixtures are supplied
with plug and socket connectors. Substitute these connectors
for the wire nuts shown throughout this manual.
OUTSIDE USA - BLADE & BLADE HOLDER HARDWARE
BLADE
HOLDER
OUTSIDE USA - BLADE & BLADE HOLDER INSTALLATION
Step 18. Attach the blades to the
blade holders with the three blade
screws and flat washers provided
for each blade. Hand tighten
securely.
Step 19. Install the assembled
blade and blade holder to the fan
motor. Hand tighten securely.
Repete for each assembly.
Step 20. Attach the pull chain fob.
PROCEED TO PAGE 13.
FOUR SEASONS™ III
BLADE SCREW
(3 PER BLADE)
FOB
(OUTSIDE USA INSTALLATION)

COMPLETING INSTALLATION

WIRE NUTS
INSTALLED
FAN AND OUTLET
CABLES SECURED BY
SPRING LOCK HOOK
FLAT WASHER BLADE HOLDER SCREW
(3 PER BLADE)
BLADE HOLDER
SCREW
(2 PER BLADE
HOLDER)
(2 PER BLADE)
BLADE SCREW
(3 PER BLADE)
FLAT WASHER
(3 PER BLADE)
11