Table of Contents
Advertisement
IMPORTANT FEATURES OF THE CT-2600 and CT-2600/E
BATTERY OPERATED CRIMPING TOOLS
•
The hydraulic unit incorporates an automatic retraction which returns the ram into its starting
position when the maximum force is reached.
•
The unit is equipped with a special brake which stops the forward motion of the ram/dies when
the trigger is released. This allows the terminal to be held in position for easy wire insertion prior
to crimping.
•
To simplify operation and gain better access to tight corners and other constrained working
areas, the crimping head may be rotated, by hand, 360° relative to the tool body.
•
The tool is lightweight and provides good handling characteristics through its small frame size
and ergonomic design.
Description
1.
Crimp Head
2.
Ram
3.
Ram Retract Button
4.
Battery Locking
Device
5.
Battery Cartridge
6.
Low Battery
Indicator
7.
Trigger
8.
Locking Flange
CT-2600 & CT-2600/E
CT-2600 and CT-2600/E
Function
Crimp head holds crimping dies
Advances dies during crimping cycle
Button to open the crimp dies in case of an error or emergency
Switch for unlocking the battery
Rechargeable Ni-MH battery, 9.6 V
LED flashes to indicate low battery
Actuator to start the crimping cycle
Opens for easy access and installation of crimp dies
PA26001A01_02
Page: 5 of 11
Fig. 1
5-2009
Advertisement
Table of Contents
