Table of Contents
Advertisement
Electric Shock Hazard:
This tool is not insulated. When using this unit on or near energized electrical lines, use
proper personal protective equipment.
Failure to observe this warning could result in severe injury or death.
Wear eye protection when operating or servicing this tool.
Failure to wear eye protection could result in serious eye injury from flying debris or hydraulic
oil.
Skin Injection Hazard:
Do not use hands to check for oil leaks. High pressure oil easily punctures skin causing
serious injury, gangrene, or death. If injured, seek medical attention immediately to remove oil.
Do not use solvents or flammable liquids to clean the crimping tool. Solvents or flammable
liquids could ignite and cause serious injury or property damage.
Pinch points:
Keep hands away from the crimping head when crimping.
Failure to observe this warning could result in severe injury or death.
An incomplete crimp can cause a fire.
•
Use proper terminal and cable combinations. Improper combinations can result in an incomplete crimp.
•
The relief valve will sound to indicate a completed crimp. If you do not hear the sound of the relief valve, the
crimp is not complete.
•
Inspect tool before use. A worn or damaged tool may result in breakage striking the operator or nearby
personnel.
Do not dispose of batteries in a fire. They will vent fumes and may explode.
Failure to observe this warning could result in severe injury from harmful fumes or burns from flying debris.
Inspect tool and dies before use. Replace any worn or damaged parts. A worn or damaged tool may result in
breakage, striking the operator or nearby personnel.
Failure to observe this warning could result in severe injury or death.
CT-2600 & CT-2600/E
CT-2600 and CT-2600/E
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
PA26001A01_02
Page: 2 of 11
5-2009
Advertisement
Table of Contents
