Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Zip HC03CTU15
Summary of Contents for Zip HC03CTU15
- Page 1 Installation instructions & user manual Water dispenser Chilled and ambient water Model number: HC03CTU15, HC03CTU15TF Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk...
-
Page 2: Table Of Contents
Temporarily putting out of service ................23 Empty the tank ......................23 Troubleshooting ......................24 Warranty ........................26 Contact details ......................28 Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 3: Generic Safety Information
• Only install in locations overseen by trained personnel. • Keep surrounding areas dry to avoid the risk of slipping. • Sanitise before use. Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 4: Specific Installation Safety Information
5°C and 32°C - Climate Class N. • If environmental conditions differ from those prescribed contact the Zip Water team on 0345 6 005 005 prior to installation. • Wear appropriate personal protective equipment. • Move with the use of mechanical aid. - Page 5 • The water dispenser must be sanitised during the commission process, please contact the Zip Water team on 0345 6 005 005 to book your commissioning service. • For water taste and quality reasons any non-use of more than 48 hours, Zip recommend a system flush be performed.
-
Page 6: Specific Maintenance Safety Information
SPECIFIC MAINTENANCE SAFETY INFORMATION Warnings • Maintenance must be carried out by a qualified Zip Water engineer or other suitably qualified person. • Unauthorised maintenance and / or maintenance performed by unqualified personnel will automatically void the warranty. • Before maintenance and cleaning, disconnect the electrical power supply and isolate the water supply. - Page 7 Zip Water team on 0345 6 005 005 for more information. • The Zip filter should be replaced at least every 12 months, at the rated capacity or sooner if you notice a persistent reduction in water flow from the tap or an unpleasant taste or odour in the water.
-
Page 8: Product Description
1/4” push fit to 3/8” BSP connector 1/4” to 1/4” straight connector Installation manual & user guide Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 9: Carbon Block Filter
32 C. See below: 100mm 100mm 100mm 100mm Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 10: The Install Rail
Mains water in The install rail must be installed vertically with the direction of flow downwards between the wholesome mains water supply and the HC03CTU15 • The install rail consists of 4 basic parts: Closed Open •... -
Page 11: The Water Block
Water Block Description • The Water Block is designed to be installed upstream of any Zip product and associated pipe-work to minimise the potential for water leakage in the event of a system malfunction. • The Water Block is ideal for limiting potential leakage and resulting water damage from water heaters, water chillers etc. - Page 12 The reset device (see Fig.2) may be fitted to avoid disconnection. This allows the Water Block to be reset by operating the lever in the direction shown in Fig.2. • In the event of persistent tripping contact the Zip Water team for advice on 0345 6 005 005. •...
-
Page 13: Technical Features
Conformity to EU Water supply Conformity to EU environmental requirements product directives & UK directives product regulations Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 14: Dimensions
Min 2 °C – Max 40 °C * rated at a room temp. of 25°C and inlet water temp. of 20°C Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 15: Uv Filtration
• Maximum capacity of the lamp 8000 hr (max 12 months). The UV steriliser complies with European quality and safety guidelines. Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 16: Installation
• Cut the packing straps (1) and pull up the cardboard box and the inner caps. • Inspect for damage, if damaged call the Zip Water team on 0345 6 005 005. • If the water dispenser has been shipped... -
Page 17: Connecting The Mains Water Supply & Drain
(3) using a Ø6mm bit. • Connect a pipe onto the drain boss Ø10mm (3) and plumb to waste. Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 18: Connecting The Mains Electricity Supply
(1) and a 230V 50Hz 13A mains socket. Set the thermostat Lower the Raise the water water temperature temperature Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 19: Commissioning
Commissioning • The water dispenser must be sanitised during the commission process, please contact the Zip Water team on 0345 6 005 005 to book your commissioning service. • Do not commission your water dispenser until ready for use. • Ensure your water dispenser is sanitised before use. -
Page 20: Operation
Chilled water - Press to dispense. Ambient water - Press to dispense. HC03CTU15TF Operation DRIP TRAY FULL TOUCH FREE Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... - Page 21 For all types of water, a prolonged dispensing operation is automatically interrupted after 30 seconds, but can easily be restarted by moving your finger back towards the sensor. Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk...
-
Page 22: Maintenance
• Connect a length of 1/4” flexible pipe to the filter head outlet, run into a bucket. • Open the isolation valve on the install rail. Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 23: General Cleaning, Drip Tray & Condenser
• In case of freezing, unplug to disconnect the power supply and wait for defrost before switching the power on again. Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk... -
Page 24: Troubleshooting
If there is a water leak sufficient to cover the leak detector probes located on the bottom of the and HC03CTU15TF, the illumination of the water dispense button P1 & P2 (see page 20) will extinguish. Call the Zip Water team on 0345 6 005 005. Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15... - Page 25 In order to preserve our environment we ask that you dispose of this product correctly. Please contact the Zip Water team for advice on 0345 6 005 005. Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15...
-
Page 26: Warranty
Subject to the exclusions set out below and in clause 5 of the terms and conditions, faulty parts and products will be replaced or repaired free of charge by Zip, its distributor or service provider, where such faults arise during the applicable warranty period. - Page 27 Notes Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk...
-
Page 28: Contact Details
Zip Water Trafalgar House, Rash’s Green, Dereham, Norfolk, NR19 1JG. 0345 6 005 005 sales@zipindustries.co.uk www.zipwater.co.uk Installation instructions & user manual Technical support T210029 v2.01 Dec 2020 - ZIP HC03CTU15 Tel: 0345 6 005 005 email: aftersales@zipindustries .co.uk www.zipwater.co.uk...
Need help?
Do you have a question about the HC03CTU15 and is the answer not in the manual?
Questions and answers