Energy Saver Mode - Canon imageCLASS 2300 Reference Manual

G If you want to use the Auto Clear function:
❑
Select <02 ON>, and proceed to step 4.
G If you do not want to use the Auto Clear function:
❑
Select <01 OFF>, and proceed to step 5.
F2
4
Press [F2] (-) or [F3] (+) to select the desired time period ©
press [OK].
F3
The Auto Clear Time settings are from 1 to 9 minutes (in one minute increments).
OK
You can also enter values using the numeric keys.
The TIMER SETTINGS menu returns.
5
Reset
Press [Reset] to return to the Basic Features screen.

Energy Saver Mode

If the machine is not used (no keys are pressed) for a certain period of time, it
enters the Energy Saver mode. You can specify the amount of time taken before
entering the Energy Saver mode from 3 to 30 minutes. You can also set the Energy
Saver to '02 OFF'.
NOTE
The default setting is '01 ON' and '15MIN'.
To reactivate the machine from the Energy Saver mode, press
To enter the Energy Saver mode manually, press
seconds.
You can select the power consumption in the Energy Saver mode between two levels
using the Additional Functions menu. (See "Power Consumption in the Energy Saver
Mode," on p. 3-13.)
If the Energy Saver and Daily Timer modes are both set, the Daily Timer settings have
priority.
The machine will not enter the Energy Saver mode when:
- The machine is in operation
- A document is in the feeder
- All paper drawers are empty
- There is jammed paper in the machine
(Energy Saver).
(Energy Saver) for more than 2
Timer Settings
3
3-25