Volume And Tone Control - Canon imageCLASS 2300 Reference Manual

4
Reset
Press [Reset] to return to the Basic Features screen.

Volume and Tone Control

This mode enables you to select whether to sound audible tones and set their
volume. The following tones sound at the following times:
Keypad Volume: When pressing keys on the control panel
Alarm Volume: When a malfunction occurs (e.g., paper jam or operational error)
Transmission Done Tone: When the fax transmission is finished
Reception Done Tone: When the fax reception is finished
Printing Done Tone: When printing has finished
Scanning Done Tone: When scanning has finished
NOTE
The default settings are '01 ON' for the Keypad, Alarm, and Scanning Done Tones, and
'02 ERROR ONLY' for the Transmission Done, Reception Done, and Printing Done
Tones. The volume is set to '1' for every tone.
The maximum volume is '3'.
Additional Functions 1
Press [Additional Functions] © press [F3] (M) or [F4] (L) to
highlight <01 COMMON SETTINGS> © press [OK].
F3
The COMMON SETTINGS menu appears.
F4
OK
F3 2
Press [F3] (M) or [F4] (L) to highlight <03 VOLUME
CONTROL> © press [OK].
F4
Each time you press
OK
option becomes highlighted.
The VOLUME CONTROL menu appears.
F3 F4
(M) or (L), the next or previous menu
Specifying Common Settings
3
3-11