Restrictions Using Department Id Management - Canon imageCLASS 2300 Reference Manual

Restrictions Using Department ID Management

When the Department ID Management is set to '02 ON', you can select whether to
activate the restriction on printing and fax transmission quantity.
NOTE
The default setting is '01 OFF'.
Additional Functions 1
Press [Additional Functions] © press [F3] (M) or [F4] (L) to
highlight <06 SYSTEM SETTINGS> © press [OK].
F3
If a System Administrator ID and password are set, enter them after selecting
<06 SYSTM SETTINGS> © press [OK].
F4
The SYSTEM SETTINGS menu appears.
OK
2
F3
Press [F3] (M) or [F4] (L) to highlight <02 DEPT. ID
MANAGEMNT> © press [OK].
F4
Each time you press
OK
option becomes highlighted.
The DEPT. ID MANAGEMNT menu appears.
3
F3
Press [F3] (M) or [F4] (L) to highlight <02 ON> © press [OK].
F4
OK
The DEPT. ID MANAGEMNT menu appears.
F3 F4
(M) or (L), the next or previous menu
Department ID Management
5
5-17