Burns On The Main Circuit Board Ewm10931 - Electrolux EWM10931 Service Manual

8.3 Burns on the main circuit board EWM10931

In the event of burns on the main circuit board, check whether the problem was caused by another electrical component (short-circuits, poor insulation, water leaks). Use
the figures that follow to pinpoint the component which may have caused the problem, depending on the area of the burns.
The type of board illustrated is the one with the largest number of components; other boards do not feature some of these components.
1. Anti-disturbance filter area
2. Power supply area
3. Satellite board communication area
4. Drum light circuit area
5. Analogue level sensor, wash NTC temperature probe, flowmeter and
weight sensor area
6. Drum positioning sensor area (top loading)
2011 SOE/DT-mdm FCPD-dp Quality-tb
Guide to diagnostics of electronic controls EWM10931x
7. Zero watt circuit area
8. Water fill solenoid valves area (bleach and 3rd)
9. Water fill solenoid valves area (wash and pre-wash)
10. Drain pump and circulation pump area
11. Door lock area
12. Heating element area
13. Relay FCV area (motor)
73/75
599 73 77-37