E57: Inverter Is Drawing More Than 16A Current - Electrolux EWM10931 Service Manual

E57
Checks to perform:
Measure between the terminals of wiring
connector J2-5 , J2-6, J2-7 and the
appliance body: is there any dispersion?
-(see fig.13)-
Y
E
S
Detach the connector from the motor and
measure between the terminals and the
motor casing. -(see fig.10)-
Is there any dispersion?
Y
E
S
Replace the motor and repeat
the diagnostic cycle to check for any
further alarms.
2011 SOE/DT-mdm FCPD-dp Quality-tb
Guide to diagnostics of electronic controls EWM10931

E57: Inverter is drawing more than 16A current

Abnormal current absorption by Motor
!
Check that all the connectors are correctly inserted
Replace the motor control board and
repeat the diagnostic cycle to check for
NO
any further alarms.
Check/replace the wiring and repeat
the diagnostic cycle to check for any
NO
!
42/75
further alarms.
If there are burns on the circuit
board, see page 73
599 73 77-37
E57