Computer Input; Selecting Input Source; Selecting Computer System - Canon LV-7555 Owner's Manual

Canon lv-7555: owners manual
Hide thumbs Also See for LV-7555:
Table of Contents

Advertisement

COMPUTER INPUT

DIRECT OPERATION
Select INPUT source by pressing INPUT button on Top Control or on
Remote Control Unit.
If projector cannot reproduce proper image, select correct input source
through MENU OPERATION (see below).
NOTE
G Input 1 terminal is switchable and can be used as computer input or
monitor output.
MENU OPERATION
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
INPUT Menu icon.
2
Press POINT UP/DOWN button and a red-arrow icon will
appear. Move arrow to INPUT source that you want to select,
and then press SET button.
WHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS )
1
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2
Press POINT UP/DOWN button to move a red arrow pointer to
Input 1 and then press SET button. Source Select Menu will
appear.
3
Move a pointer to source that you want to select and then press
SET button.
RGB(Analog)
When your computer is connected to INPUT 1 (ANALOG)
terminal, select RGB(Analog).
RGB(Scart)
When video equipment is connected to INPUT 1 (ANALOG)
terminal, select RGB(Scart).
RGB(PC Digital)
When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB(PC Digital).
RGB(AV HDCP)
If a HDCP-compatible signal source is connected to the INPUT 1
(DIGITAL) terminal, select RGB(AV HDCP).
Monitor out
If the INPUT 1 ANALOG terminal is being used as a MONITOR
OUT terminal, select Monitor out.

SELECTING INPUT SOURCE

SELECTING COMPUTER SYSTEM

INPUT button
Input 1
Input 2
Input 3
Input 1 is not displayed when the Input 1 is used as
Monitor out.
INPUT Menu icon
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 1 and press SET but-
ton.
Input 1
Source Select Menu
Move a pointer to source
and press SET button.
NOTE;
HDCP (High-bandwidth Digital Content
Protection) is a system for protecting digital
entertainment content which is delivered by DVI
(Digital Visual Interface) from being copied.
The specification of HDCP is decided and
controlled by Digital Content Protection, LLC.
Should the specification be changed, this
projector may not display the digital content
protected by HDCP.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lv-7555f

Table of Contents