Select Computer System Manually - Canon LV-7555 Owner's Manual

COMPUTER INPUT
When connect a computer output [5 BNC Type (Green, Blue, Red,
Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V
jacks.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2 Press POINT UP/DOWN button to move a red arrow pointer to
Input 2 and then press SET button. Source Select Menu will
appear.
3 Press POINT UP/DOWN button and a red-arrow icon will
appear. Move arrow to "RGB", and then press SET button.
This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to
"COMPATIBLE COMPUTER SPECIFICATION" on page 49). When a computer is selected, this projector automatically
tunes to incoming signal and projects the proper image without any special setting. (Some computers need to be set
manually.)
The projector displays one of the Auto, -----, Mode 1/2/3/4/5, or the system provided in the projector.
When projector cannot recognize connected signal as PC
Auto
system provided in this projector, Auto PC Adjustment
function operates to adjust projector and message "Auto"
is displayed on SYSTEM Menu icon.
When image is not provided properly, manual adjustment
is required. (Refer to P26 and 27.)
There is no signal input from computer. Make sure
––––
connection of computer and a projector is set correctly.
(Refer to TROUBLESHOOTING on page 46.)
User preset adjustment in MANUAL PC ADJUSTMENT.
Mode 1
Adjustment data can be stored in the Mode 1-5.
Computer systems provided in the projector. The
SVGA 1
projector chooses proper system and displays it.
✽
Mode 1 and SVGA 1 are examples.

SELECT COMPUTER SYSTEM MANUALLY

This projector automatically selects PC system among those provided
in this projector and PC system can be also selected manually.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to PC
SYSTEM Menu icon.
2 Press POINT UP/DOWN button to move a red arrow pointer to
system that you want to set, and then press SET button.
24
WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
AUTOMATIC MULTI-SCAN SYSTEM
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 2 and press SET but-
ton.
Input 2
Source Select Menu
Move a pointer to RGB and
press SET button.
PC SYSTEM MENU
PC SYSTEM Menu icon
Displays system being
selected.
PC SYSTEM MENU
PC SYSTEM Menu icon
Displays system being selected.
Systems on this dialog box can
be selected.
Custom Mode (1~5) set in PC
ADJUST Menu. (P26, 27)