Computer Input; Selecting Input Source; Selecting Computer System - Canon LV-7545 Owner's Manual

COMPUTER INPUT

DIRECT OPERATION
Choose Computer by pressing INPUT button on Top Control or on
Remote Control Unit.
If projector cannot reproduce proper image, select correct input source
through MENU OPERATION (see below).
MENU OPERATION
Press MENU button and ON-SCREEN MENU will appear. Press
1
POINT LEFT/RIGHT buttons to select Input and press SET
button. Another dialog box INPUT SELECT Menu will appear.
2 Press POINT DOWN button and a red-arrow icon will appear.
Move arrow to INPUT source that you want to select, and then
press SET button.
WHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS )
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
Press POINT DOWN button to move a red arrow pointer to Input
2
1 and then press SET button. Source Select Menu will appear.
3 Move a pointer to either Digital or Analog and then press SET
button.
When your computer is connected to COMPUTER
Digital
INPUT (DIGITAL) terminal, select Digital.
When your computer is connected to COMPUTER INPUT
Analog
(ANALOG) terminal, select Analog.
When connect a computer output [5 BNC Type (Green, Blue, Red,
Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V
jacks.
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2 Press POINT DOWN button to move a red arrow pointer to Input
2 and then press SET button. Source Select Menu will appear.
Press POINT DOWN button and a red-arrow icon will appear.
3
Move arrow to "RGB", and then press SET button.
22

SELECTING INPUT SOURCE

SELECTING COMPUTER SYSTEM

WHEN SELECT INPUT 2 (5 BNC INPUT JACKS )
INPUT button
INPUT 1
INPUT 2
INPUT 3
INPUT Menu icon
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 1 and press SET but-
ton.
Input 1
Source Select Menu
Move a pointer to Digital or
Analog and press SET but-
ton.
INPUT MENU
INPUT Menu icon
Move a pointer (red arrow) to
Input 2 and press SET but-
ton.
Input 2
Source Select Menu
Move a pointer to RGB and
press SET button.