Computer Input
Input Source Selection (COMPUTER 1: ANALOG PC)
Direct Operation
Choose COMPUTER 1(ANALOG PC) by pressing the
COMPUTER 1 button on the remote controller.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point
3
When COMPUTER 1 is selected, press the Point
access the submenu items. Use the Point
to select the ANALOG PC input source and then press
the OK button.
Note:
When the Auto input function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.53).
32
buttons to select Input and
or the OK button.
buttons to select COMPUTER 1.
Remote Controller
COMPUTER 1(ANALOG PC)
COMPUTER 1(SCART)
Input Menu
to
buttons
COMPUTER
1
COMPUTER 1 button
3D