Canon LV-7555 Owner's Manual page 35

4 To move the red frame pointer to "MENU", and then press the
SET button. The message "OK"? is displayed. Move the pointer
to [Yes] and then press SET button. The COLOR MANAGE-
MENT menu will be exited and the display will return to the
IMAGE ADJUST menu. (At this time, the image will stop being
paused and normal projection will resume.) After changing the
COLOR MANAGEMENT settings, use the IMAGE ADJUST
menu to store the changed settings.
COLOR SELECTION MODE
CANCEL
The mode will return to the pointer mode (even if you press the
MENU key on the projector or the remote control). (You will need to
reselect and re-adjust the color in this case.)
QUIT
The COLOR MANAGEMENT menu will be exited and the display will
return to the normal projection screen, but any settings that have
been changed will not be stored. To store the changed settings, be
sure to select "LIST" using the POINT buttons and change to the
next mode (LIST mode).
LIST MODE
The check mark will be cleared and the effect of the setting adjustment
for that line on the projected images will be momentarily canceled.
COLOR PALETTE
The mode will return to COLOR SELECTION mode so that you can
re-adjust the setting for the color in that line. This option is not avail-
able if the check mark has been cleared by the operation immediate-
ly above.)
DEL
The setting adjustment for the color in that line will be canceled.
ALL DEL
The setting adjustment for the colors in all lines will be canceled.
COLOR M.
The mode will return to POINTER mode.
Auto picture control
Press either POINT LEFT button or POINT RIGHT button to Auto
picture control position that you want to select . (Off, L1 or L2)
Off ······· Auto picture control OFF position.
L1 ········ Auto picture control LEVEL 1 position.
L2 ········ Auto picture control LEVEL 2 position.
COLOR SELECTION
MODE
Level and phase
adjustment palette.
LIST CANCEL
LIST MODE
COLOR PALETTE
ALL DEL
MENU
PICTURE IMAGE
Gamma
adjustment palette.
QUIT
DEL
COLOR M.
35